Katie
18/11/2015 02:06:58 pm
In our design,we used cardboard,corrugated cardboard,masking tape and plastic straws and tissue paper and a piece of card. We think that our design was really extremely good. The main thing went well was working well as a team.Our team was: Katie h Callum h Leah m and Josh k .The first thing we did was sticking a piece of card on to our base. Then, using masking tape we stuck corrugated cardboard on top of the card. Several minutes later , we added plastic wallets on to our structure. Finally we decorated the base with green and brown tissue paper for grass,mud and rock. We could improve our design by adding more waterproof materiel and more decoration.
Reply
18/11/2015 02:20:54 pm
My Air raid shelter😛
Reply
Natasha
18/11/2015 02:23:04 pm
Firstly,we got all are things that we needed. Than we shaped are shelter we glue it on to a piece of strong card .Then we coved the corrugated carborad with plastic walts to make it water proof. After that we made a door so the Lego persons can fit in.Finally,we decarated are shelter.
Reply
Eva, Sadie and Erin
18/11/2015 02:25:34 pm
First of all we sorted our stuff out into what we needed first .Then we moved the rest out of the way .Then we glued the corrugated cardboard to the original card board next we started to tape straws inside the shelter .Next we made the walls and the door. Then we started to put tissue paper onto the top and brown splats of mud.Next we made it water proof then it was done it took lots of masking tape but it is very strong. We could of made the door a bit better but that's fine for now it's not gonna let water in.I think it will hold the weight let the Lego people in and let no water in at all.
Reply
Jaymee
18/11/2015 02:29:08 pm
We Started by doing the base of it then when made it so it was hard so a 1kg stone and we had to water prove it and firnly we did our sand bags we could of inprored by making it without glue because it did not go so well
Reply
Erin B
18/11/2015 02:29:56 pm
First of all we sorted things into what we want at the start. So we got the materials for the structure and started working on that. We used straws for support and a circle of card that Connor made, which made it extremely strong. The outside was only made of card so we reinforced it with corrigated cardboard going across the canopy.
Reply
Harrison
18/11/2015 02:31:54 pm
We started with a base,then our group had a talk about how to build it .Soon after we started with normal cardboard we got masking tape and stuck it on the base then we did the same.2 minutes later we made a door because that was tricky it was made out of straws covered with masking tape.Then we made the back of the shelter and we cut out a shape of the shelter it didn't fit it at the back but then we got some spare pieces and filled the gaps.After break we done the front we struggled making the front but then we finished the front.We all had an idea of making sand packs out of spare cardboard then we stuck it,after lunch we added a few more layers at the end we got plastic wallets so water can't get through it
Reply
Oscar D
18/11/2015 02:32:38 pm
Our shelter was held together by glue and masking tape.Plastic wallets kept our shelter dry.We made pillars to hold the structure together on the inside.The door opened,leading to a room with pillars!Both walls where held up by a slab of cardboard.Finally we camouflaged it.A flag marked our territory!
Reply
Sadie
18/11/2015 02:34:57 pm
First we got cardboard on our table and then we glued some corageted cardboard in an arch shape. We then put masking tape all over it. Then we covered it in green tissue paper with some scrunched up brown tissue paper.
Reply
Kyle P
18/11/2015 02:36:23 pm
We need to improve on the teamwork and the outside decoration.
Reply
Charlie W
18/11/2015 02:40:01 pm
Today we had a really fun lesson, creating WW2 bomb shelters. We used Paper, Corrigated cardboard and masking tape. Some of our shelters had flags, which was cool. I have really enjoyed this lesson and the previous planning lessons.
Reply
Thomas
18/11/2015 02:41:05 pm
My group used:masking tape , tissue paper, corrugated card board , PVA glue and plastic wallets . The best bit about our shelter is how we made the roof stay up when we tested the one kilogram Wight it never broken it but it was slowly going down so we put another layer on it and it never pushed it down then we needed to see how big the Lego figure was then we cut out the size they were and they were fine in there . Then we put the plastic wallets over it so it was water proof .
Reply
Amelie
18/11/2015 02:43:19 pm
How I made My air raid shelter :
Reply
Amy
18/11/2015 02:44:26 pm
First we got some card and cut it in half .Then we got the corrugated cardboard and cut it in half to make it thick . After we put the card down in place and made sure it did not fall and put masking tape on then I got the other piece of card and measured it to make the walls and on one side we cut out a door then we put a plastic wallet on it so it will not go through then put 2 layers of sellotape on and then we glued them toghther to put them on .
Reply
Your comment will be posted after it is approved.
Leave a Reply. |
Miss Hammond's BlogWelcome to our blog! Find out what we are doing in school and take a look at our fabulous work! Archives
January 2016
|